Archive for February, 2009
Sewage, Blood, Urine, Feces Cleanup
Posted by: | CommentsDo:
- Stay out of affected areas.
- Call emergency service personnel if the situation is life threatening.
- Treat all bodily fluids as if they are contaminated.
- Turn off the HVAC system if there is a sewage damage.
Don’t:
- Attempt cleanup of any kind.
- Touch or handle items that might be contaminated with bodily fluids.
- Eat, drink, smoke, apply cosmetics or handle contact lenses in affected areas.
- If exposed to harmful waste, OSHA recommends a post-exposure medical evaluation. Consult your local health department or physician.
Vandalism Damage Cleanup
Posted by: | CommentsDo:
- Hose or wash egg damage from building exterior as soon as possible.
- Blot freshly spilled food from carpets and fabrics with a dampened cloth or sponge (but don’t over wet).
- Scrape and blot(don’t rub: it may damage fibers).
- Vacuum glass particles from carpets and upholstery.
- Save containers, which reveal the composition of spilled inks,cosmetics and paints.
Don’t:
- Attempt to remove ink, paint or cosmetic stains.
- Operate damaged lamps or appliances.
- Discard wood chips, broken pieces from furniture, porcelain or other art objects.
Water Damage
Posted by: | CommentsDo:
- Remove as much excess water as possible by mopping and blotting.
- Wipe excess water from wood furniture after removal of lamps and table top items.
- Remove and prop wet upholstery and pillow cushions for even drying.Place aluminum foil or wood blocks between furniture legs and wet carpeting.
- Turn air conditioning on for maximum drying in summer.
- Remove Oriental rugs or other colored rugs from wet wall-to-wall carpeting.
- Remove valuable paintings and art objects to a safe, dry place.Open and place luggage, in sunlight to dry, if possible.Gather loose items, toys, etc. from floors.
Don’t:
- Leave wet fabrics in place; dry as soon as possible. Hang furs and leather
goods to dry separately at room temperature. - Leave books, magazines or other colored items on wet carpets or floors.
- Use your household vacuum to remove water.
- Use TVs or other household appliances while standing on wet carpets
or floors, especially not on wet concrete floors. - Turn on ceiling fixtures if ceiling is wet,and keep out of rooms where ceilings are sagging from retained water.
Fire, Smoke, & Soot Damage
Posted by: | CommentsDo:
- Limit movement in the home to prevent soot particles from being imbedded into upholstery and carpets.
- Keep hands clean. Soot on hands can further soil upholstery, walls andwood work.
-
Blow or brush vacuum loose soot particles from upholstery, drapes and carpets.
-
Place clean towels or old linens on rugs, upholstery and carpet traffic areas.
- If electricity is off, empty freezer and refrigerator completely and prop doors open.
- Clean and protect chrome on kitchen and bathroom faucets, trim and appliances with light coating of Vaseline or oil.
- Wash house plants on both sides of leaves.
- Change HVAC filter.
- Tape double layers of cheese cloth over air registers.
Don’t:
- Attempt to wash any walls or painted surfaces without first contacting your SERVPRO Professional.
- Attempt to shampoo carpet or upholstered furniture without first consulting your SERVPRO Professional.
- Attempt to clean any electrical appliances, TV sets, radios, etc. that may have been close to fire, heat or water without first consulting an authorized repair service.
- Use any canned or packaged food or beverages that may have been stored close to fire, heat or water. (They may be contaminated.)
- Turn on ceiling fixtures if ceiling is wet.Wiring may be wet or damaged.
- Send garments to ordinary dry cleaner. Improper cleaning may set smoke odor.
Mold Mitigation
Posted by: | CommentsThis is good information on mold from the EPA. Molds can be found almost anywhere; they can grow on virtually any organic substance, as long as moisture and oxygen are present. There are molds that can grow on wood, paper, carpet, foods, and insulation. When excessive moisture accumulates in buildings or on building materials, mold growth will often occur, particularly if the moisture problem remains undiscovered or unaddressed. It is impossible to eliminate all mold and mold spores in the indoor environment. However, mold growth can be controlled indoors by controlling moisture indoors.
To learn how we remove mold visit our Mold Mitigation and Remediation page or call us today for a free estimate at 1-800-675-0190, or email us through our contact page.
.
The Key to Mold Control is Moisture Control.
It is important to dry water damaged areas and items within 24-48 hours to prevent mold growth. If mold is a problem in your home, clean up the mold and get rid of the excess water or moisture. Fix leaky plumbing or other sources of water. Wash mold off hard surfaces with detergent and water, and dry completely. Absorbent materials (such as ceiling tiles & carpet) that become moldy may have to be replaced. For more information about mold visit epa.gov. If you would like a free estimate call us immediately at (800) 675-0190 or email us through our contact page, and we will start the mitigation process.
